4 Wheller ext - question (parent breaking system)

[Randevous]

Hi All !!! please help

To what object parent (braking system) that it did not turn, and accompanied in accuracy a wheel?

thnx!

[Carl Buhre]

Hello Randevous and welcome to our forum. I'm not sure I understand your question but I think what you're looking for is the WheelCenterMesh (WheelerExt_01_WheelCenterMesh_FR, WheelerExt_01_WheelCenterMesh_FL, WheelerExt_01_WheelCenterMesh_BR & WheelerExt_01_WheelCenterMesh_BL).

[Randevous]

The matter is that at me is hires a wheel, and in a wheel there are details for example (support system) any (breaking disk) - which do not turn together with a wheel but only repeat its movement.

How to me to make so that breaking disk did not take off from a wheel at turn?

Forgive for my bad English language ))

[Carl Buhre]

Ah ok, for that you can utilize Craft Gyro which is a part of Craft Free Utilities.

• Scale Craft Gyro to a proper size. Its size doesn't have any effect, it's just to make it easier to see.
• Align it to the WheelCenterMesh.
• Parent Gyro_01_pivot to the WheelCenterMesh.
• Then parent the support system/breaking system to Gyro_01_gyro.

Finally enter the configuration of Craft Gyro and select restriction: "Pitch only" (I might be wrong here, if it didn't work try another restriction) and press Resimulate.

[Randevous]

Thanks your help!!!

[Carl Buhre]

No problem, I hope it helped. If you run into any other problems please post them.