...I have big time problem with tracks, when I set them, by following tutorial that comes with application, it seems that tracks don't react at all... & when I start simulation, tracks are lunched in air just so... what to do?
Cheers & tnx...
Tracks for Crawler Extended
Forum rules
We only allow posts that
If these rules are not met you are most likely going to be banned.
Please Note:
We only allow posts that
- Is in English
- Is related to our tools and the programs they support.
If these rules are not met you are most likely going to be banned.
Please Note:
- New users will have their posts reviewed before being publicly available for other to see.
-
Micael Belin
- CTO
- Posts: 168
- Joined: Thu Apr 03, 2008 9:39 am
- Location: Gothenburg, Sweden
- Contact:
Re: Tracks for Crawler Extended
Hi Rex,
This is usually caused by too much tension on the tracks. Make sure the tracks have free play between support wheels (they must not intersect anywhere at start)
Also, make sure you have sufficient space between the ground wheels and the ground for room for the tracks. If you base the crawlertrack's wheel positions on the crawler, you need to make the crawler's wheels slightly larger than the crawlerTracks. Otherwise the tracks will be forced through the ground, making the physics engine go berserk.
This is usually caused by too much tension on the tracks. Make sure the tracks have free play between support wheels (they must not intersect anywhere at start)
Also, make sure you have sufficient space between the ground wheels and the ground for room for the tracks. If you base the crawlertrack's wheel positions on the crawler, you need to make the crawler's wheels slightly larger than the crawlerTracks. Otherwise the tracks will be forced through the ground, making the physics engine go berserk.
[email protected]
http://www.craftanimations.com
http://www.craftanimations.com
Who is online
Users browsing this forum: No registered users and 87 guests